Windows Update Error 0x80070020: The release of a new major update for Windows 10 is a momentous occasion for everyone at Microsoft. To make the system over the previous version, new features are added, as well as further enhancements and problem corrections. While this sounds fantastic, many users have difficulty obtaining the update. In addition, update issues can hinder users from normally installing a new major update.
As history has shown, no significant Windows 10 update has been immune to installation issues, which manifest themselves in various forms, or more accurately, as various error codes. This post will discuss error code 0x80070020, which allegedly prohibits users from installing a new version of Windows 10.
We can’t let this error persist indefinitely because installing the most recent Windows 10 version is strongly recommended. As a result, we’ve prepared a few solutions that may be useful in dealing with error code 0x80070020 on Windows 10.
Why Do I See The Warning “Windows Failed To Install The Following Update With Error 0x80070020”?
This warning is similar to update error 0x80070026, and it is recommended that you run the update troubleshooter if you encounter it. Damaged Windows components can cause various issues, including update error 0x803c0109. Again, if you encounter it, we recommend running that the update service is operational.
Many people have reported some problems installing updates warning while trying to update, and we discussed this issue in full in a separate tutorial, which you should check. For example, the 0x80070020 error code might prevent you from installing the most recent updates. In addition to update problems, users reported the following issues:
Error 0x80070020 Windows 7 – This 0x80070020 error can also happen in previous versions. Even though these solutions are designed for Windows 10, virtually all of them can be adapted to previous versions of Windows, so give them a shot.
Download Error – 0x80070020 Windows 10 – This error may happen while downloading the most recent Windows 10 builds. If this occurs, restart Windows Update components to see if it helps.
How Can I Solve The Windows 10 Update Error Code 0x80070020?
Run Update Troubleshooter
If none of the other solutions worked, you should try running Microsoft’s official Update Troubleshooter. This tool resolves several update-related issues and may also solve your problem. To run the Windows Update troubleshooter, follow these steps:
1 – Download Microsoft’s Windows Update Troubleshooter.
2 – Run the tool and follow the instructions on the screen.
3 – Now, try to install the update again.
Restart BITS
Well, Background Intelligent Transfer Service (BITS) is a Windows process that is in charge of sending updates to your computer. As a result, if this process becomes corrupt, you will have problems obtaining updates. Therefore, we need to restart BITS and run Windows Update to get things working again. What you must do is as follows:
1 – Enter services.msc by pressing Windows Key + R. Enter or click OK to continue.
2 – Now, Find Background Intelligent Transfer Service. Open Properties by right-clicking.
3 – On the General tab, look for Startup type and select Automatic.
4 – If the BITS is not already running, right-click and select Start.
5 – Lastly, Confirm the selection and close the window.
If nothing is wrong with BITS, try another solution.
Reset Windows Update Services
Windows Update relies on several services to function correctly, and resetting Windows Update services may be able to resolve any issues. This reasonably simple order requires you to run a few commands in Command Prompt. To accomplish this, follow these steps:
1 – First, Start Command Prompt as administrator.
2 – Launch Command Prompt and run the following commands:
- net stop wuauserv
- net stop cryptSvc
- net stop bits
- net stop msiserver
- ren C:WindowsSoftwareDistribution SoftwareDistribution.old
- ren C:WindowsSystem32catroot2 Catroot2.old
- net start wuauserv
- net start cryptSvc
- net start bits
- net start msiserver
Check to see if the Windows Update problem has been resolved after running these commands. If you don’t want to input all these commands manually, you may use the Windows Update reset script to perform this solution.
Perform SFC/SCANNOW
Although many users believe the SFC scan to be an overrated solution, it may be useful in specific instances. If you’re unfamiliar with this tool, it searches your computer for issues and corrupted features and attempts to solve them (more or less) successfully. In Windows 10, follow these steps to run the sfc/scannow command:
1 – To open the Win + X menu, press Windows Key + X. Choose Command Prompt (Admin) or Powershell (Admin) from the list.
2 – In the command prompt, enter sfc/scannow.
3 – The process should take a few minutes.
4 – When finished, close the Command Prompt.
If the SFC scan fails to fix the problem, or if you cannot run the SFC scan at all, you may want to consider using the DISM scan instead. To perform a DISM scan, do the following:
1 – Run Command Prompt as administrator.
2 – To run the command, type DISM /Online /Cleanup-Image /RestoreHealth and click Enter.
3 – The DISM scan will now start. Don’t interrupt the scan if it takes more than 20 minutes.
When the scan is done, check to see if the problem has been resolved. If the issue persists or you could not run the SFC scan previously, run it again. Again, check to see whether the issue has been resolved.
Disable Antivirus
Third-party antivirus software and Windows are not the greatest of friends. A third-party antivirus installed on your computer may cause more harm than good. This incompatibility can create problems with various Windows features, including Windows Update.
If you’re using a third-party antivirus, you could want to experiment with different settings to see if that helps. In rare circumstances, you may need to disable your antivirus to resolve this issue. However, even if you disable your antivirus, Windows 10 has its antivirus, Windows Defender, so your computer is safe.
In rare circumstances, you may have to uninstall your antivirus to solve this issue. However, if uninstalling the antivirus resolves the problem, you might consider switching to a new antivirus solution. Several excellent antivirus software solutions are entirely compatible with Windows 10 and will not interfere with it.
To Find The Faulty Services, Use Command Prompt
According to users, some services might occasionally interact with your system, resulting in error 0x80070020. You can, however, find these services by using Command Prompt. Do the following to do this:
1 – Run Command Prompt as administrator.
2 – Now, execute netstat -aon | find “:80” and netstat -aon | find “:443”. You’ll see a list of details. Examine the numbers on the right side. These numbers reflect the process IDs that are utilizing your network connection.
3 – To find a troublesome process, use Task Manager. You may accomplish this by hitting Ctrl + Shift + Esc at the same time.
4 – When Task Manager is launched, navigate to the Details tab and look at the PID column. Well, you should be able to find the same numbers you found in Step 2 there. Find the troublesome process, select it, and click the End task button.
5 – Return to the Services window and check for Step 2 in the PID column. Well, if you find a match, right-click the service with that PID and select Stop from the menu. Keep in mind that some services are necessary by Windows, so use caution while disabling them.
This is an advanced solution, so proceed with caution and carefully follow the instructions.
Perform An In-place Upgrade
If you cannot update Windows due to a 0x80070020 error, you should consider conducting an in-place upgrade. This process will install the most recent version of Windows while keeping all of your files and apps intact. You must do the following to perform an in-place upgrade:
1 – Go to Microsoft’s website and download the Media Creation Tool.
2 – After downloading Media Creation Tool, launch it.
3 – Choose Upgrade this PC now.
4 – Wait for Media Creation Tool to prepare the required files.
5 – Choose Download and install updates and then click Next. Wait for updates to download.
6 – Follow the on-screen instructions until you reach the Ready to install screen. Click on Change what to keep.
7 – Choose to Keep personal files and apps. Now click the Next button.
8 – The installation process will now start. To finish it, follow the instructions on the screen.
When the installation is complete, you will have the most recent version of Windows installed, and the problem should be resolved. That’s all there is to it; we hope this post helps you with error code 0x80070020 and that you can now install the new update normally.
FAQs – 0x80070020
How To Fix Error Code 0x80070020?
Well, if Windows Update encountered an error with the code 0x80070020, you might fix it by resetting the BITS service or terminating and restarting the stalled service.
What Exactly is DISM?
The DISM is an acronym that stands for Deployment Image Servicing and Management. It is a command-line tool for creating or repairing Windows images.
How To Fix Windows Update Corruption?
The corruption of the Windows Update Database is normally repaired by running command-line instructions to scan and repair system files on the device. SFC and CHKDSK are the most useful commands.
Also, Take A Look At:
Conclusion:
If you’ve any comments, questions, or recommendations, please leave them in the space below.
